|
WESMAR
VORTEX DUAL PROP BOW THRUSTERS
(BACK TO WESMAR MAIN PAGE)
THRUSTERS
WESMAR BOW THRUSTERS GUIDE
VORTEX SINGLE PROP BOW THRUSTERS
VORTEX DUAL PROP BOW THRUSTERS
COMMERCIAL MARINE BOW THRUSTERS
DC PRO 100% DUTY CYCLE THRUSTER MOTORS
STABILIZERS
ROLL FIN STABILIZERS
SONAR
WESMAR SONAR SYSTEMS
HYDRAULICS
WESMAR HYDRAULIC SYSTEMS
ALSO SEE:
WESMAR TESTIMONIALS
|
|
|
|
"WESMAR Dual Prop Bow Thrusters & Stern Thrusters -
40% More Thrust, Precise Control, Ultimate Reliability!" |
|
|
When you're ready for some serious power, Vortex dual prop bow thrusters are ready for the job!
40% More Thrust per Input Horsepower
100% Duty Cycle Motors Available
Precise, Fully Proportional Controls
Easier to Retrofit & Integrate
Extremely Rugged, Low Maintenance
36 Years of Proven Performance!
|
|
Dimensions
& Applications - Thruster Hydraulics -
Testimonials - Contact
Us
|
|
Vortex Dual Prop Bow Thruster Models:
|
Standard Dual Prop Bow Thruster is the ultimate thruster for Pleasure Craft and lighter duty Working Vessels from 38 to 165+ feet
in length. The revolutionary counter-rotating dual prop configuration
delivers a staggering 40% more thrust per input horsepower! Along with the
extra power, you'll have more precise control over that power with the fully
proportional controls! |
|
|
Heavy Duty series 200
and 350 provides extraordinary thrust in a compact design for large Pleasure
Craft and Working Vessels. The 200 series is for 150 to 200 horsepower
applications and uses smaller
props for optimum tunnel location. The 350 series steps up
to a 350 horsepower rating and uses 40 inch props for incredible brute
strength and power! |
Vortex dual prop bow
thrusters are easy to retrofit and are available for virtually any drive
configuration including, AC or DC Electric, Hydraulic and Direct
Drive.
Stern Thruster Use:
Vortex Thrusters can also be mounted directly to the transom with the
NEW transom adapter plate from
WESMAR, or installed in a tunnel when space permits.
Also see:
Single Prop vs. Dual Prop -
Bow
Thruster Hydraulics - Testimonials
Vortex Bow Thruster Features:
28 Models - 5 to 350 HP capability
12 to 48 Volt DC, Hydraulic, AC, or Direct Drive
Heavy Duty Stainless Steel Shafting, Bearing Carriers & Props
Bolt-on design for easy installation and maintenance
Easy to upgrade without removing thruster
Hydrodynamic housing produces smooth flow and greater power
Contact us about WESMAR Vortex Bow Thrusters!
(back to top) |
|
MODEL
(Max HP) |
V2-6E
(5HP)
V2-6H (5HP) |
V2-8E (5HP)
V2-8H (5HP) |
V2-8E (13HP) V2-8H (15HP) |
V2-10E (13HP) V2-10H (25HP) |
A |
16.23" (412mm) |
16.23" (412mm) |
16.23" (412mm) |
19.32" (490mm) |
B |
E 13.69" (347mm) H 10.19"(258mm) |
E 13.8" (351mm) H 9.315" (236mm) |
E 15.54" (395mm) H 9315" (237mm) |
E18.21"(463mm) H12.06"(306mm) |
C |
14.40" (366mm) |
14.4" (366mm) |
14.40" (366mm) |
21.60" (549mm) |
Prop |
5.8" (142mm) |
7.5" (190mm) |
7.5" (190mm) |
9.5"(241mm) |
OD (Fiberglass Tube) |
6.625" (168mm) |
8.625" (219mm) |
8.625" (219mm) |
10.75" (273mm) |
ID (Fiberglass Tube) |
6.065" (154mm) |
8" (203mm) |
8" (203mm) |
10" (254mm) |
OD Steel/Alum Pipe |
6" Schedule 40 |
8" Schedule 40 |
8" Schedule 40 |
10" Schedule 40 |
ID Steel/Alum Pipe |
6.065" (154mm) |
7.981" (202mm) |
7.981" (202mm) |
10.020" (254mm) |
BOAT SIZE |
20-36 ft. (6-11 m) |
25-48 ft. (7-15 m) |
40-55 ft. (7-15 m) |
42-55 ft. (13-17m) |
MODEL
(Max HP) |
V2-12E (13HP)
V2-12H (25/40HP) |
V2-16H |
V2-18H |
V2-20H |
A |
19.32" (490mm) |
22.66" (525mm) |
22.64 (575mm) |
31.81" (808mm) |
B |
E16.58"(421mm) H11.63"(295mm) |
15.35"(390mm) |
14.35"(364mm) |
6.92"(176mm) |
C |
21.60" (549mm) |
24.40" (619mm) |
24.40" (619mm) |
24.40" (619mm) |
Prop |
12.25" (311mm) |
16.0" (406mm) |
18.0" (457mm) |
20.5" (520mm) |
OD (Fiberglass Tube) |
14" (355mm) |
18.0" (457mm) |
20.0" (508mm) |
Contact CMI |
ID (Fiberglass Tube) |
12.75" (324mm) |
16.5" (419mm) |
18.5" (469mm) |
Contact CMI |
OD Steel/Alum Pipe |
14" Schedule 40 |
18" Schedule 40 |
20" Schedule 40 |
22" Schedule 40 |
ID Steel/Alum Pipe |
13.124" (333mm) |
16.876" (428mm) |
18.812" (477mm) |
21" (533.4mm) |
BOAT SIZE |
45-65 ft. (13-20m) |
60-130 ft. (18-40m) |
90-165 ft. (27-50m) |
90-165 ft. (27-50m) |
Vortex Heavy Duty Bow Thrusters
Specifications
MODEL |
V2-22H V2-6H |
V2-24H |
A |
31.81" (808mm) |
35.5" (902) |
B |
5.92" (150mm)) |
8.48" (215mm) |
C |
24.40" (619mm) |
9.54" (242mm) |
Prop |
22.1" (561mm) |
24.5" (622mm) |
OD (Fiberglass Tube) |
Contact CMI |
N/A |
ID (Fiberglass Tube) |
Contact CMI |
N/A |
Contact CMI for more information about the version 350 specifications.
|
|
Contact Us About WESMAR Vortex Bow Thrusters!
(back to top)
|
|
|
|