The M6 Boat Air Conditioning System
- For Boats up to 30' or 550 cu. ft. Cabins/Sleeping Compartments
The M6 boat air
conditioning unit is available in right, left or top air discharge, and
Cool Only, Cool/Reverse Cycle Heat, or Cool/Electric Heat configurations. Designed for
cruisers up to 27' and sailboats up to 30', the M6 Model can
also be used to cool cabins or individual sleeping compartments of up
to 550 cubic feet on much larger vessels!
M6 Marine Air Conditioners - Power Requirements & Specifications:
This unit will run off the
new Honda eu1000i 1,000 watt portable generator, while in cool mode.
Another option is to use a Statpower 1,000 Watt Inverter and 450 amp hours
of battery power and you can anchor out (on average) for one night.
Ducting: We use 4”
ducting and recommend a minimum of 2, 4” round supply grills with this
installation. More is better! Unit Dimensions: L-16" W-11.5"
H-11.5" (left and top discharge, add 1" in length). Running Amperage:
Cool = 6.4 amps, Electric Heat = 17.5 amps, Reverse Cycle = 7.5 amps (Add
approximately one amp for the standard seawater pumps. Startup amperage is calculated by running amperage multiplied by 1.8).
Model M-6C - Cool only
Model M-6CEH - Cool/Electric Heat
Model M-6CHP - Cool/Reverse Cycle Heat
Above models include a programmable digital thermostat!
Mermaid Marine Air Conditioner/Heater Manuals
Installation Guide
(462K pdf)
Schematics
(665K pdf)
Installation Kits and Options:
A complete basic installation kit including electrical connection kit, Footscoop, seacock, water strainer,
and dual ducting kit is available, as well as a deluxe kit (see list
below).
The Inverter kit and batteries are optional. (PUMP NOT INCLUDED).
All units are available in 220v for an additional $100.00, and require a
72 hour lead time.
BASIC INSTALLATION
KIT LIST
|
QTY |
5/8" THRU HULL/OVERBOARD |
1 |
3/8" DRAIN HOSE |
6' |
5/8" MARINE HOSE |
20' |
3/4" MARINE HOSE |
3' |
4" ROUND PLASTIC SUPPLY AIR GRILLS (WHITE) |
2 |
BALL VALVE (SEACOCK) |
1 |
BRONZE FOOT SCOOP |
1 |
WATER STRAINER W/BRACKET |
1 |
BLEED OFF VALVE |
1 |
PVC-3/4" THREAD TO HOSE ELBOW |
1 |
3/4" CLOSED END NIPPLE |
1 |
4" X 4" X 4" METAL WYE |
1 |
RETURN AIR GRILL/ALUMINUM 12 X 8 |
1 |
DUCT 4" NON-INSULATED |
25' |
STANDARD MARINE CIRCUIT BREAKER |
1 |
12/3 GAUGE BOAT POWER CABLE |
15' |
16/3 GAUGE PUMP POWER CABLE |
15' |
#12 STAINLESS STEEL HOSE CLAMP |
8 |
#8 STAINLESS STEEL HOSE CLAMP |
12 |
#8 - 1/2" STAINLESS STEEL MOUNT SCREWS |
12 |
#14 - 2" STAINLESS STEEL MOUNT SCREWS-A/C |
4 |
14" TIE STRAPS |
20 |
DELUXE
INSTALLATION KIT LIST
|
QTY |
THERMOSTAT FACE PLATE WHITE |
1 |
5/8" THRU HULL/OVERBOARD CHROME |
1 |
CHROME DRIP EDGE |
1 |
3/8" DRAIN HOSE |
9' |
5/8" MARINE HOSE BLK REINF |
25' |
3/4" MARINE HOSE BLK REINF |
5' |
TEAK 4" X 4" SUPPLY AIR GRILL |
2 |
PLASTIC TRANSITION BOX 4"X 4" W/4" RING END |
2 |
BALL VALVE (SEACOCK) |
1 |
BRONZE FOOT SCOOP |
1 |
GRACO RAW WATER STRAINER (BRONZE) |
1 |
BLEED OFF VALVE |
1 |
PVC-3/4" THREAD TO HOSE ELBOW |
1 |
3/4" CLOSED END NIPPLE |
1 |
4" X 4" X 4" PLASTIC HOSE WYE |
1 |
RETURN AIR GRILL/TEAK 12" X 8" |
1 |
DUCT 4" NON-INSULATED BAG |
25' |
STANDARD MARINE CIRCUIT BREAKER |
1 |
12/3 GAUGE BOAT POWER CABLE |
20' |
16/3 GAUGE PUMP POWER CABLE |
20' |
#12 STAINLESS STEEL HOSE CLAMP |
8 |
#8 STAINLESS STEEL HOSE CLAMP |
12 |
#8 - 1/2" STAINLESS STEEL MOUNT SCREWS |
12 |
#14 - 2" STAINLESS STEEL MOUNT SCREWS-A/C |
4 |
INSULATED MOUNT PAD |
1 |
14" TIE STRAPS |
20 |
|